Shandong Xingda Aluminum Plastic Decorative Material Co., Ltd.

News

Update your company dynamics and related product knowledge at any time

/
/
/
Techniques and methods of folding and slotting aluminum-plastic panels

Techniques and methods of folding and slotting aluminum-plastic panels

(Summary description)Aluminum-plastic panels are widely used, and most of the time, they have to be folded. Today, as an old employee of Xingda Aluminum-plastics, I will explain to you how aluminum-plastic panels can be folded better.

Techniques and methods of folding and slotting aluminum-plastic panels

(Summary description)Aluminum-plastic panels are widely used, and most of the time, they have to be folded. Today, as an old employee of Xingda Aluminum-plastics, I will explain to you how aluminum-plastic panels can be folded better.

  • Categories:Company News
  • Time of issue:2020-11-04 11:38
  • Views:
Information
  Aluminum-plastic panels are widely used, and most of the time, they have to be folded. Today, as an old employee of Xingda Aluminum-plastics, I will explain to you how aluminum-plastic panels can be folded better.
  First of all, everyone knows that the prerequisite for the folding of aluminum-plastic panels is that the aluminum foil is thick enough. The thicker the aluminum skin, the better the folding. Before folding the aluminum-plastic panel, the first choice is to use a slotting machine (trimming) from the back of the aluminum-plastic panel. Machine) Open a groove, otherwise it will not be able to fold the edge. The depth of the groove is adjusted according to the thickness of the aluminum-plastic. First, shorten the cutter head and try slowly until it seems that the aluminum skin is not exposed. That is, if it is deep, it will easily scratch the aluminum skin and cause the hemming to break. If it is shallow, it will easily crack.
  The other is to choose the cutter head. There are U-shaped and V-shaped cutter heads. The U-shaped cutter head is not easy to scratch the aluminum skin, but the folded corners are not very straight. The V-shaped cutter heads have sharp corners. Straight and good-looking angles, but it is easy to scratch the aluminum skin and cause aluminum skin to crack. Generally, a 6# cutter head can be used for 4mm aluminum-plastic panels.
  There is also that the folding of aluminum-plastic panels mainly depends on the aluminum skin. Many people’s misunderstanding is that raw rubber cannot be folded, but cooked glue can be folded. In fact, this is wrong, because the folding is to remove the middle plastic, so The hemming mainly depends on the thickness of the aluminum skin. Generally, the 6-wire or more often sold in the market can fully meet the 90-degree hemming needs. If the roller arc is required, the back of the pipe bender needs to be selected according to different construction requirements. For spheronization angle, the middle core material of aluminum-plastic composite panel is divided into raw rubber and cooked rubber. If the roller arc is used, only cooked rubber can be used instead of raw rubber. The above is the experience of using aluminum-plastic panels for more than ten years.

Scan the QR code to read on your phone

News

Tel:Mr. Dai 86-13869983858 86-539-8559077

Fax:86-539-8559177

E-mail:371340116@qq.com

Web:www.xingdals.com

Address:Lizhuang Town Industrial Park, Tancheng County, Linyi City, Shandong Province

XINGDA Mobile site
Username used for comment:
底部留言
Description:

底部留言

验证码

LINKS:

Copyrignt ©2020 Linyi Xingda Aluminum Plastic Decorative Material Co., Ltd